Abstract: Ni particles with a so simple procedure were deposited on the graphite rod, and the performance of the proposed electrode was investigated for electrocatalytic oxidation of  methyl phenyl sulfide in acidic media. It was found that performance of the Ni-modified electrode for oxidation of sulfide is successful. Voltammetric and amperometric studies […]

53 Investigation of Methyl Phenyl Sulfide Electro-oxidation in Environmentally ...



Abstract:  Multiple -well test (Interference and Pulse- Tests) are used to establish communication between wells and determine the inter- well reservoir properties. Both tests are conducted to determine the values of permeability (Kef) and porosity (Øef) pulse testing  has some additional advantage. It is more sensitive to unknown pressure trends […]

66 Pressure Pulse Testing in Reservoirs



* Corresponding Author: Behrooz Roozbehani(Professor.roozbehani@rice.edu) Abstract: Catalytic pyrolysis of plastic wastes is recently deemed as an effective way to address the drastic issue of Municipal Solid Waste (MSW) accumulation in the globe. In this work, catalytic pyrolysis of waste low-density polyethylene plastics (LDPE) to liquid fuels is studied. Response surface methodology […]

34 Catalytic Pyrolysis of Plastic Waste to Liquid Fuel: ...



* Corresponding Author: Behrooz Roozbehani(Professor.roozbehani@rice.edu) Abstract:           In this work, CoFe2O4/ZnO and CoFe2O4/ZnO/Ag nanoparticles were synthesized by co-precipitation and photodeposition methods. The obtained samples were characterized using X-ray diffraction, scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared, vibrating sample magnetometer, inductively coupled plasma optical emission and UV-Vis diffuse reflectance spectrometry. […]

14 Efficient Degradation of Dye Pollutants by Rapid Separable ...



* Corresponding Author: Muhammad Rizwan (rizwan52400@gmail.com)   Abstract: Unsaturated fatty acids (UFA) having cis configuration are vital factor in diet as a source of fats. Among UFA, omega-6 and omega-9 gives more epoxidized products due to greater unsaturation level. The high content of linoleic and oleic acid of citruluslanatus (Watermelon) […]

65 Characterization of Epoxidized High Contents of Linoleic & ...



* Corresponding Author: Roozbehani@put.ac.ir   Abstract: Light expanded clay aggregate (LECA) coated with iron oxide (Fe2O3) was tested as a sorbent in the removal of Ni (II) from contaminated water. The efficiency of sorbent was investigated using operational parameters including contact time, initial pH, sorbent dosage and initial Ni (II) concentration […]

53 The Adsorption Kinetics and Modeling for Nickel (II) ...



* Corresponding Author: Roozbehani@put.ac.ir   Abstract:    Mesoporous silica is an important material which has various industrial applications. Currently, it is produced from precursors that are costly. Mesoporous silica with pores of ordered 1-dimensional hexagonal structure MCM-41was synthesized under basic media using sugar cane ash as silica precursor and cetyltrimethylammoniumbromide(CTAB) as […]

13 A Report on Manufacturing Mesoporous Magnetic Modified MCM-41 ...



* Corresponding Author: Falah Banihani (falahbh@bau.edu.jo) Abstract: The search for unconventional oil resources during the last decade has increased due to an increase in the demand. Therefore, extracting and producing of oil from bitumen, oil shell, sand oil and carbonate rock were investigated by many countries around the word. The […]

34 Extraction of Oil from Jordanian Carbonate Rock



* Corresponding Author: Behrooz Roozbehani(Professor.roozbehani@rice.edu) Abstract: The latest developments in zeolite synthesis and catalyst applications are reviewed, this review also discusses the current industrial applications of the zeolite catalyst, for example, fluid catalyst cracking, methanol to olefins and conversion of renewable feedstocks. Porous materials containing Lewis-acid metals (e.g., Al, Ga, Sn, […]

24 Zeolites Synthesis, Catalysis Properties and Applications



Abstract: Polypropylene waste was use to prepare liquid fuel by catalytic pyrolysis. The process was carried out with batch reactor at temperature in between 300 O C to 4500 C by using Zeolite, Zinc oxide, Alumina silicate catalyst. The results from catalytic degradation shows yield of liquid fuel in between […]

66 Preparation of Liquid Fuel from Polypropylene Waste Using ...



Abstract: The effect of different equations of state on production well simulation results have been investigated. Concerning considerable application of PIPESIM software in production units in petroleum industry, the available equations of state in this software have been explored and compared in this article. A production well has been simulated using different equations of state and […]

230 Investigation of The Effect of Equations of State ...



Abstract: Since membranes are used to separate ions, gases, water purification and various purification products, achieving a new alternative structures to increase their yield is very important. Carbon structures such as graphene and carbon nanotubes are very much considered due to their hydrophobic properties and the free space between them, […]

58 Application of CNTs in Membranes (A Review)



Abstract: TiO2/Fe3O4 and TiO2/Fe2O3 nano-composites with various ratios were synthesized by an ultrasonic-assisted deposition-precipitation method and their UV-light for treatment of spent caustic wastewater color was investigated. The effect of Fe3O4/TiO2 and Fe2O3-TiO2 nano-composites ratio on the photocatalytic activity and magnetic property of the nano-composites was studied by comparing their […]

50 Photocatalytic Treatment of Spent Caustic Wastewater Color



Abstract: In this Investigation, photocatalytic process of COD reduction for a real spent caustic wastewater sample(Red Oil),were used with Design of Experiment(DOE)Method. In this Method, Response surface model(RSM) was obtained in the view of a Box-Behnken design (BBD) with four variables as the input factors, i.e. TiO2 loading (g/l), pH, […]

216 Red Oil Wastewater COD Photocatalytic Removal with DOE ...



Abstract: Rock-Eval Pyrolysis and its results are commonly used for determination and interpretation of the characteristics of sedimentary basins. The aim of this study is to examine and compare hydrocarbon generation potential of Gadvan formation by using Rock Eval analysis in 5 wells of the Azadegan oil field. This oil […]

203 Investigation of Hydrocarbon Generation Potential of Gadvan Formation ...



Abstract: Wellhead choke is an instrument which is installed in flow pipes or where the fluid leaves the wellhead, in order to control the flow, prevent well head equipment damage resulted from high pressure, prevent gas and water conning and sand control. Several empirical models were proposed for multiphase flow […]

193 Developing A New Multiphase Model for Choke Function ...



Abstract: One of the most important properties of reservoir fluids is bubble point pressure which helps the reservoir engineer to estimate reservoir oil in place, inflow performance and to design wellhead equipment. In this study, 65 tested data, related to 10 wells located in the one Southwest fields in Iran […]

178 The Exposure of New Estimating Models for Bubble ...



Abstract: Recognition of Subsurface fracture system is of prime importance for developing carbonate hydrocarbon-bearing fields. The purpose of this study was to employ XRMI in order to provide details of fault related fractures characterization. Also faults and fractures were recognized and assessed through analyze raw data by means of special […]

160 Fracture Characterization Utilizing XRMI Tool and Mud Loss ...



Abstract: One of the most important parameters in understanding static modeling of reservoir is having facies and their distribution in the reservoir zone. Since in the most of reservoirs facies distribution directly related to the permeability and porosity variation, therefore having these parameters can gain an estimate of the distribution […]

150 Lithofacies Classification Using Borehole Image Log and Multi ...



Abstract: Pentachlorophenol (PCP) is a very hazardous compound that enters into the environment by industries such as refinery and petrochemical industry.  As its biological degradation is very slow, this use may be caused pollution of soils and groundwater. Here we compare the results obtained by electro-Fenton and Sono-electro-Fenton treatment methods […]

141 Advanced Oxidation of Pentachlorophenol: A Comparison Between Electro-Fenton, ...



Abstract: In this laboratory study thin disc type pure alumina membranes have been prepared by slip casting method. Constant amount of 1,2-dihydroxy-3,5-benzenedisulfonic acid disodium salt (Tiron) at constant suspension concentration and various concentration of polyvinyl alcohol (PVA) solution were examined. Sintering temperature, solid content, PVA content, ball milling time and […]

130 Study About Effect of Binder Addition and Sintering ...



Abstract: Considering the fact that Propane pipelines have potential risk in the oil Sites implementing crisis management realistically, requires that the consequences of probable accidents scientifically explored and assessed. Any leakage in pipes can lead to fire, explosion, equipment damage, or toxicity to the personnel or people around, so that […]

41Risk Assessment and Consequence Modeling of Propane Escaping from ...



Abstract: The capabilities and functions of FANP model during the two recent decades have been varied so much that various scientific fields use this model based on their desired application. In the FANP model, the definition of criteria, sub-criteria and nodes for determining the status of network is performed on […]

33Aplication of FANP Model in Evaluating The Prioritization of ...



Abstract: This paper discusses the movement of reservoir fluids movement and shows the procedure of using field measurement unit (Slickline Unit) to determine the contacts between the reservoir fluids (oil, gas & water contacts). In reservoir engineering, various tasks are required to be performed; one of these tasks is the […]

119Fluid Contacts Determination and Drive Forces Movement Monitoring in ...



Abstract: In this paper, a sequence stratigraphy and reservoir petrophysical analysis of a single oil well (Well H) has been prepared by using an available core data and wireline logging data with a view to characterizing the reservoir. In addition, petrophysical analysis initiated with lithology identification and lithological panels interpreted […]

107Geological and Petrophysical Evaluation for an Oil Well