4Improvement the Surface Structure of Nickel-Aluminum Bronze (NAB) Alloy Using Al2O3 Nanoparticles and FSP Method


Abstract:  

Nickel-Aluminum bronze (NAB) alloy is an alloy of copper base that is used extensively for marine applications such as propellers, because it exhibits excellent corrosion resistance and mechanical properties. For surface hardening and elimination of defects caused by the casting alloy, FSP is applied on NAB. In recent years, this process has been used as an acceptable way to create composite surface layers. In this paper, alumina oxide (Al2O3) nanoparticles are used in order to create a composite layer on the NAB alloy by FSP. Then the hardness and microstructure in three states of casting, FSP, FSP with alumina oxide nanoparticles on the surface are studied and compared. Based on the results, surface composite layer created by FSP has the highest hardness and along with alloy proceeded under FSP process without the presence of nanoparticles in surface has a structure which is fine and free of cast defects.

Keyword: NAB alloy, FSP, surface nano composite

 

References:

  • D.R.Ni, B.l.Xiao, Z.Y.Ma, Y.X.Qiao, V.G.Zheng,”Corrosion properties of friction-stir processed cast NiAl bronze”, Corrosion Science 52, 2010.
  • seyedi nasab, seyed Mehdi; hadyan, mahammad Mehdi; studying developed application of bronze-aluminum alloys and nickel- aluminum bronze alloy in marine industries, 12th of marine industries congress, Iran, zibakenar,2010.
  • R.S.Mishra, Z.Y.Ma, “Friction stir welding and processing”, Materials, Science and Engineering R 50, 2005.
  • J.R.C.Strang, Shipham Valves, “Nickel-Aluminium Bronze for seawater”, 2007.
  • karimi, mahammad hosein; nick farjam, moaud; rezaei, hamid; mazinani, mortaza; access to technical science and engineering and manufacturing surface semi-merged screw propeller, 9th of marine industries congress, 2007.
  • M.D.Fuller1, S.Swaminathan, A.P.Zhilyaev2, T.R.Mc.Nelley, “Microstructural transformations and mechanical properties of cast NiAl Bronze: Effects of fusion welding and friction stir processing”, Materials Science and Engineering A 463, 2007.
  • Standard Stocked Product, Cast, Nickel-Aluminium Bronze.
  • Saatchi, ahmad; corrosion engineering, jihad of university, industrial branch of Isfahan, 2008.
  • Toyserkani, hassein; material science, industrial university of Isfahan, 2000.
  • R.C.Barika, J.A.Whartona, R.J.K.Wooda, K.S.Tana,b, K.R.S.Stokesc, “Erosion and erosion-corrosion performance of cast and thermally sprayed nickel-aluminium bronze”, Wear 259, 2005.
  • A.Al-Hashem, W.Riad, “The role of microstructure of nickel-aluminium bronze alloy on its cavitation corrosion behavior in natural seawater”, Materials characterization 48, 2002.
  • Stefanie Hanke, Alfons Fischer, Matthias Beyer, Jorge dos Santos, “Cavitation erosion of NiAl-Bronze layers generated by friction surfacing”, Wear, 2011.
  • Rabiizadeh, amin; afsari, ahmad; mahammadi, mehrdad; producing and studying surface Nano composite properties of aluminum/ Al-CNT produced by friction-stir process, journal of new materials, third volume, winter 2012.
  • T.R.Mc.Nelley, “Friction Stir Processing (FSP): refining microstructures and improving properties”, REVISTA DE METALURGIA, 2010.
  • Asisieh, Mahdi; sadegi, ali reza; kokabi, amir hosein; studing microstructure and mechanical properties of friction-stir connection of aluminum 1100 to AZ31, journal of new materials, second volume, winter 2011.
  • KEIICHIRO OH-ISHI and TERRY R.Mc.NELLEY, “The Influence of Friction Stir Processing parameters on Microstructure of As-Cast NiAl Bronze”, METALLURGICAL AND MATERIAL TRANSACTION, 2005.
  • R.Salekrostam, M.K.Besharati, P.Asadi, “Influence of Friction Stir Processing parameters on the Fabrication of Sic/316L surface composite”, Defect and Diffusion Form Vols, 2010.
  • Yong X.Gan, Daniel Solomon and Michael Reinbolt, “Friction Stir Processing of Particle Reinforced Composite Materials” Materials, 2010.
  • M.W.Mahony, S.P.lynch, “Friction –Stir Processing”, Rockwell Scientific Company LLC, 2006.
  • F.Nascimento, T.Santos, P.Vilaca, R.M.Miranda, L.Quintino, “Microstructural modification and ductility enhancement of surfaces modified by FSP in aluminium alloys”, Materials Science and Engineering A 506, 2009.
  • V.Jeganathan Arulmoni, Ranganath M.S, R.S.Mishra, “Effect of process parameters on Friction Stir Processed Copper and Enhancement of Mechanical Properties of the Composite Materials”, IRJSSE, 2014.
  • D.R.NI, P.XUE, and Z.Y.MA, “Effect of Multiple-Pass Friction Stir Processing overlapping on Microstructure and Mechanical Properties of As-Cast NiAl Bronze”, The Mineral, Metals and Materials Society and ASM International 2011.
  • Kunalsinh R.Kathia, “Influence of tool pin depth of penetration in Aluminum alloys over joint parameters in friction stir welding”, ISSN, International Journal of Engineering Development and Research.
  • J.A.Querin, H.A.Schneider, “Pin Tool Geometry Effects in Friction Stir Welding”, FSW and FSP, TMS Annual 2007.
  • Dovood Nakhaie, Ali Davoodi, Amin Imani, “The role of constituent phases on corrosion initiation of NiAl Bronze in acidic media studied by SEM-EDS, AFM and SKPFM”, Corrosion Science 80, 2014.
  • Brian P.Rosemark, “Friction stir processing parameters and property distributions in cast Nickel Aluminium Bronze”, Naval Postgraduate School, Monterey, California, 2006.
  • Datong Zhang, Ruiping Chen, Weiwen Zhang, Zongqiang Luo, “Effect of microstructure on the mechanical and corrosion behaviore of a hot-extruded nickel aluminium bronze”, Acta Metallurgica Science, 2010.
  • Chaharmiri, rasoul; kokabi, omid; surface hardening of nickel- aluminum bronze alloy by FSP process, 8th of national congress of surface engineering and thermal operation, shahid bahonar university, kerman, 2007.
  • Jafari,hasan; studying effects of thermal operation on fatigue behavior in molten bronze-aluminum contained of nickel, iron and manganese, technological and educational journal, material and metallogical journal, engineering and technical college, educational university of shahid rajaii, first volume, no.3, spring, 2007.
  • Petr Jonsta, Katerina Konecna, Roman Heide, Miriam Gabcova, Zdenek Jonsta, “Microstructural Analysis of a Cast Variant of Nickel SuperAlloy Inconel 738LC after High Temperature Exposition”, Brno, Czech Republic, EU, 2011.
  • O.A.OJO, N.L.RICHARDS, M.C.CHATURVEDI, “on incipient melting during high temperature heat treatment of cast Inconel 738 superalloy”, Journal of Materials Science 39, 2004.
  • Harry chandler, “Heat Treaters Guide Practices and Procedures for Nonfrrous Alloys”, ASM International, Materials Park, 2006.
  • R.Sathiskumar, N. Murugan, I.Dinaharan, S.J.Vijay, “Role of friction stir processing parameters on microstructure and microhardness of boron carbide particulate reinforced Copper surface composite”, Indian Academy of Sciences, December 2013.
  • hejazi, jalal; casting systems, publication of industry and science university, 2005.
  • F.Hasan, A.Jahanafrooz, G.W.Lorimer and N.Ridley, “The morphology, crystallography, and chemistry of phases in As-Cast Nickel-Aluminium Bronze”, American Society for Metals and the Metallurgical Society of AIME, 1982.
  • Sarath K.Menon, Frank.A.Pierce, Brian P.Rosemark, “Strengthening Mechanisms in NiAl Bronze: Hot Deformation by Rolling and Friction-Stir Processing”, Springer, 2012.
  • Prabhash Jain, Praveen Kumar Nigam, “Influence of Heat Treatment on Microstructure and Hardness of Nickel Aluminium Bronze (Cu-10al-5ni-5fe)”, Journal of Mechanical and Civil Engineering, 2013.
  • Ghader Faraji, Omid Dastani, and S.Ali Asghar Akbari Mousavi, “Effect of process parameters on microstructure and micro-hardness of AZ91/Al2o3 surface composite produced by FSP” ASM International, 2011.
  • K.S.Tan, J.A.Wharton, R.J.K.Wood, “Solid particle erosion-corrosion behavior of a navel HVOF nickel aluminium bronze coating for marine applications-correlation between mass loss and electrochemical measurements” Science Direct, Wear 258, 2005.
  • Aleh karam, saeed reza; darounparvar, mahammad reza; behnamian, mahammad reza; studying passivation of thermal samples of nickel- aluminum bronze ( C95520) by liner polarization (LPR), Impedance (ELS) and ZRA, petroleum/oil research, no.65, 2011.
  • M.K.Lee, S.M.hong, G.H.Kim, K.H.Kim, C.K.Rhee, W.W.Kim, “Numerical correlation of the cavitation bubble collapse load and frequency with the pitting damage of flame quenched Cu-9Al-4.5Ni-4.5Fe alloy”, Materials Science and Engineering A425, 2006.