295Experimental Study of Nanoparticle-Surfactant-Stabilized Foam for Potential Drilling Application: IFT, Foamability and Stability


Abstract:

Today underbalanced drilling has attracted much attention to itself. Among low density drilling fluids, foam has better ability to carry drilling cuttings, and to suspense them while drilling is stopped. Of foam properties, which has important role in cont rolling bottomhole pressure and carrying cutting, are foam stability and foamability. Mixture of nanoparticle and surfactant was used to stabilize foam. Nanoparticles could not solely generate foam. With adsorption of cationic surfactant molecules on nanoparticles, they change from complete hydrophilicity to partial hydrophobicity, and make nanoparticles as a surface active material.

The surface tension of nanoparticle-surfactant mixture was measured in domain of surfactant concentration, nanoparticle concentration, salinity and pH. Measurement revealed that surface tension experienced a minimum which is related to maximum adsorption of surfactant on nanoparticles. Also, surface tension decreased with an increase in nanoparticles and a decrease in salinity.

Nanoparticle-surfactant stabilized foam was prepared through Ross-Miles method, and foamability and foam stability was investigated. With respect to reduction in the surface tension, the domain of surfactant concentration divided into two chara cteristic section, namely, high adsorption and low adsorption, respectively related to high IFT reduction and low IFT reduction. It was found out that foamability has the most resistance in high adsorption region.

In high adsorption region (about 1 CMC), due to reaching to the maximum hydrophobicity, nanoparticles act as a surface active material and obtain the more stability than surfactant stabilized foam and nanoparticle-surfactant stabilized foam at low adsorption region.

Keywords: Foam drilling, Surfactant, Nanoparticle, IFT, Foamability, Foam stability.

References:

  •  Wang, G. (1984). A laboratory study of CO2 foam properties and displacement mechanism. Presented at the SPE Enhanced Oil Recovery Symposium, Society of Petroleum Engineers.

  • Wang, G. (1984). A laboratory study of CO2 foam properties and displacement mechanism. Presented at the SPE Enhanced Oil Recovery Symposium, Society of Petroleum Engineers. 2) Pickering, S. U. (1907). Cxcvi.-emulsions. Journal of the Chemical Society, Transactions, 91, 2001-2021.

  • Ramsden, W. (1903). Separation of Solids in the Surface-Layers of Solutions and¬タルSuspensions¬タル(Observations on Surface-Membranes, Bubbles, Emulsions, and Mechanical Coagulation).–Preliminary Account. Proceedings of the Royal Society of London, 156-164.

  • Binks, B. P. (2002). Particles as surfactants¬タヤsimilarities and differences. Current opinion in colloid & interface science, 7(1), 21-41.

  • Horozov, T. S. (2008). Foams and foam films stabilised by solid particles. Current Opinion in Colloid & Interface Science, 13(3), 134-140.

  •  Alargova, R. G., Warhadpande, D. S., Paunov, V. N., & Velev, O. D. (2004). Foam superstabilization by polymer microrods. Langmuir, 20(24), 10371-10374.

  • Binks, B. P., Kirkland, M., & Rodrigues, J. A. (2008). Origin of stabilisation of aqueous foams in nanoparticle¬タモsurfactant mixtures. Soft Matter, 4(12), 2373-2382.

  • Nguyen, P., Fadaei, H., & Sinton, D. (2014). Pore-scale assessment of nanoparticle-stabilized CO2 foam for enhanced oil recovery. Energy & Fuels, 28(10), 6221-6227.

  •  Binks, B. P., & Horozov, T. S. (2005). Aqueous foams stabilized solely by silica nanoparticles. Angewandte Chemie, 117(24), 3788-3791.

  •  Dickson, J. L., Binks, B. P., & Johnston, K. P. (2004). Stabilization of carbon dioxide-in-water emulsions with silica nanoparticles. Langmuir, 20(19), 7976-7983.